BU-303 has all the hardware necessary for connecting to your PC or laptop and provides you with easy and convenient access to the USB. If you need a GPS receiver for software, you will be able to obtain self-developed applications with velocity and timely data. This is the ideal selection that you don''t want to miss!
Feature:
1. SiRF Star II/LP high performance and low
power consumption chipset.
2. All-in-view 12-channel parallel processing.
3. Built-in active antenna.
4. High sensitivity to satellite signal.
5. Cold start under 45 seconds, average.
6. Superior urban canyon performance.
7. FoliageLock for weak signal tracking.
8. Build-in SuperCap to reserve system data for
rapid satellite acquisition.
9. Supported NMEA 0183 command: GGA, GSA, GSV, RMC,
GLL, VTG
10. Super-cohesive magnetic for mounting on the car.
11. LED indicator for GPS fix or not fix.
LED OFF: Receiver switch off
LED ON : No fixed, Signal searching
LED Flashing: Position Fixed
12. Non-slip on the bottom
13. USB interface connection port
| Specification |
Interface USB Interface
Output Messages NMEA0183 V2.2 protocol, and supports command:GGA, GSA, GSV, RMC, GLL, VTG
Datum WGS84
Hot Start 8 sec.average
Warm Start 38 sec.average
Cold Start 45 sec.average
Altitude Limit 18,000m(60,000 feet)Max.
Re-acquisition 100ms
Velocity Limit 515 meters/sec(1000knots)Max
Jerk Limit 20 m/sec**3
Horizontal Accuracy 15m 2d RMS without SA
5m 2d RMS WAAS enabled
Velocity Accuracy 0.1m/sec 95%
Time Accuracy 1us synchronized to GPS time
Dimension 59 mm*47mm*21mm
Power Consumption 80 mA(include Antenna)
Storage Temperature -40°C ~ 85°C
Operation Temperature -40°C ~ 80°C
Humidity Up to 95% non - Condensing |
